Caring for Sterling Silver
Sterling silver becomes tarnished as the result of a natural chemical process that occurs when sterling silver is exposed to chemicals in the air, rubber, wool and latex. Humidity also plays a role in accelerating tarnishing. It's easy to keep your sterling silver sparkling, though, by taking a few steps to prevent tarnish and other wear and tear.

Vermeil Plating:
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.

The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.

Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.

To care for your plated jewelry items:

Platinum Plating:
Platinum can be used as a finish coating over sterling silver or copper alloys. Its bright, pure luster enhances the brilliance of gemstones and does not discolor or oxidize. Platinum plating is also characterized by its good resistance to surface abrasion, making jewelry pieces more durable against everyday and long-term wear. Over time, platinum plating will wear off and therefore will require re-plating.

To care for your plated jewelry items:

Gold Karat
Gold's softness and malleability make it a wonderful metal to work with when creating virtually any design in jewelry. But this softness can be a drawback as well. To make it stronger and more durable, gold is usually alloyed, or mixed, with other metals such as copper or silver. The higher a metal's percentage of gold content, the softer and more yellow the jewelry piece. The karat weight system used to measure gold in a piece is the same for all hues, including white and yellow gold.

The word “carat” is Arabic, meaning “bean seed.” This is because historically seeds were used to measure weights of gold and precious stones. In the United States, “karat” with a “k” is used to measure gold's purity, while “carat” with a “c” is used in measuring a gemstone's size. The karat mark of gold represents the percentage of pure gold to alloy.

In order to determine the karat weight of a specific item, simply look for the quality mark. Jewelry items will bear the stamp of their karatage based upon the United States or European system of marking. The United States system designates pieces by their karats—24K, 18K, 14K, 10K, etc. The European system designates pieces by their percentage of gold content. For instance, 10K gold is marked “417,” denoting 41.7% gold; 14K is marked “585,” denoting 58.5% gold; and 18K is marked “750,” denoting 75% gold; etc.

Yellow Gold
By far the most common color of gold used in jewelry, yellow gold is gold in its natural shade. Yellow gold is usually alloyed with copper and silver to increase the strength of the metal. How yellow the metal is depends upon the content of gold. A 14-karat piece of jewelry will have a brighter yellow hue than a 10-karat piece. Likewise, an 18-karat piece of jewelry will have a deeper yellow than 14-karat gold, and so on.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.

On the Mohs Scale, which measures the hardness of minerals, cubic zirconia is an 8.0 to 8.5. It is important to understand that hardness is not necessarily related to durability. Even though diamond is the hardest mineral (10.0 on the Mohs Scale), it can still be chipped or broken.

The only ways to tell the difference between cubic zirconia and diamond are by use of a thermal probe, by weighing the loose stone or by microscopic examination of surface features and inclusions. Cubic zirconia weighs approximately 65% more than diamond. Therefore, while a 6.25 mm round diamond weighs about 1.00 carat, the same size cubic zirconia weighs about 1.65 carats. If you know the weight of a cubic zirconia, you can figure out the diamond weight equivalent by multiplying the cubic zirconia weight by 0.6, or 60%.

Few natural diamonds on the market today are perfectly cut, and those that are cost much more than the usual diamond. Unleashing the fire, beauty and brilliance of a stone depends on its precise cut. Simulated diamonds are an excellent balance between quality, beauty and price.

Glossary

Brilliance: The white light leaving a jewel, traveling upward, which is visible to the eye. Brilliance is sometimes referred to as “sparkle.”

Dispersion: Flashes of rainbow colors. Also called “fire.”

Hardness: Resistance to scratching. The higher the number, the more resistant.

Luster: The shininess of a jewel.

Toughness: Resistance to breakage.