Skip to main content
Adjust Text Size:

This necklace is part of the classic Acqua Bagnata collection from Toscana Italiana. The acqua bagnata figaro link necklace is the perfect way to spice up your wardrobe, with your choice of length, it's sure to work with any neckline. Pair it with your favorite bracelet or earrings and let the compliments roll in.

Details

  • Material Content: Bronze
  • Plating Type: 18K Yellow Gold Plated
  • Primary Finish: Hammered
  • Length: 18in., 20in. and 24in.
  • Width: 7/16in.
  • Height: 1/4in.
  • Chain Type: Figaro
  • Chain Width: 7/16in.
  • Clasp Type: Lobster
  • Country of Origin: Italy

Product Disclaimer

Necklace Clasp Types
A clasp is more than a practical device used to fasten your jewelry. It is part of the overall design and can be a very important focal point. Be sure to consider if it will suit your needs of durability, fashion, comfort and peace of mind.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.

Necklace Clasp Types
A clasp is more than a practical device used to fasten your jewelry. It is part of the overall design and can be a very important focal point. Be sure to consider if it will suit your needs of durability, fashion, comfort and peace of mind.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.

Necklace Clasp Types
A clasp is more than a practical device used to fasten your jewelry. It is part of the overall design and can be a very important focal point. Be sure to consider if it will suit your needs of durability, fashion, comfort and peace of mind.

Barrel Clasp: Used on most rope chains to make the chain more secure. The barrel clasp looks like part of the chain and twists to get a pendant on and off.

Lobster Claw Clasp: As a traditional clasp style found in bracelets and necklaces, the lobster claw is generally reserved for heavier styles that may need added strength. The closure's shape is more oblong, similar to a teardrop shape, and is controlled by a tip that opens and closes the spring in the clasp.

Magnetic Clasp: A magnetic clasp relies on a strong internal magnet that works to pull both ends of the clasp together. In most cases, a magnetic clasp is used for light to medium weight jewelry pieces that do not put excessive stress on the magnet.

S-Clasp: An S-shaped piece of metal that connects a chain by hooking metal rings on each end of the S-shape.

Slide Insert Clasp: This type of clasp is exactly as it sounds. With a box-like shape that is hollow on the inside, the wearer will slide the nearly-flat tab into the box until it clicks, indicating a secure closure. On some jewelry, a slide insert clasp will be accompanied by a side safety catch, which adds strength and security to the clasp.

Spring Ring Clasp: One of the most common closure types, the spring ring clasp is typically used for light to medium weight bracelets or necklaces. It is round in its design and features a small tip which controls the opening and closing of the spring. The circle then closes around another smaller loop or link at the other end of the strand.

Toggle Clasp: A toggle clasp is a narrow piece of metal, usually designed in the shape of a bar, which is then pushed through a circular ring to act as a fastener. Unlike the lobster claw or spring ring clasps, a toggle clasp is not controlled by a spring. The pretty design is less secure than other closure types, but is usually meant to be a big part of the design and is meant to "show". The clasp is an attractive way to secure a chunkier link bracelet or necklace.

Necklace Sizing
The length of a necklace or chain you buy depends upon a number of factors, including what you will be wearing with it and your neck size.

To measure your neck, wrap a soft, flexible tape measure around the base of your neck. This is the same measurement used for collar sizes in men's shirts. A good rule of thumb is to buy a necklace or chain a minimum of two sizes up from your neck measurement.

Vermeil Plating:
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.

The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.

Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.

To care for your plated jewelry items:

  • Remove jewelry before bathing, swimming, washing hands, putting on make-up, lotions, perfumes, and/or working with household chemicals, cleaners, or acidic liquids.
  • Do not clean plated jewelry in an ultrasonic cleaner or in silver cleaning solutions, as it could completely remove the plating finish from your item.
  • Ensure your jewelry item is thoroughly dry before storing. Moisture in an enclosed space can increase tarnishing.
  • Store your plated jewelry in a jewelry box lined with felt or anti-tarnish material. Items should not be stacked as this may cause damage to the plating surface.
  • Do not use excessive pressure when cleaning with a polishing cloth or soft brush, as this may cause damage to the plating.
  • Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.