Make it seem like someone's always at home! It doesn't hurt to have a presence in your house, even when you're not there. Now we're not talking about ghosts or anything like that. We're talking about the appearance of someone being home. What if when a door opened or a window was broken, the stereo started playing or the light came on? That might be just enough to deter someone from going any further.

Enter the Plug & Safe Infrasonic Security Device. It's a unique "sensor scanner" device that operates by detecting the low-level subsonic vibrations created by movement. Plug it into a wall outlet, connect an AC powered device or appliance, then if a nearby door or window is opened or smashed, the Plug & Safe Infrasonic Security Device will detect it and automatically switch on the connected device or appliance and power it for three minutes.

A quick an easy way to add on an extra level of security to your property! An add on to the Plug & Safe PS8, this little siren sensor and alarm device operates by detecting low-level, subsonic vibrations. Just plug in and if a nearby door or window is opened or smashed, the Plug & Safe Infrasonic Security Device will detect it and automatically sound a siren. That might be just enough to deter someone from going any further.

Plug & Safe Infrasonic Security Device

• Plug & Safe Infrasonic Security Device helps detect the opening or breaking of windows or doors and turns on whatever device or appliance is connected to it
• Works when exterior doors open or close, allowing it to be used as a home sensor to trigger a visual and/or sound alarm
• Easy to set up - no wires or lengthy installation - simply plug it into a wall outlet and connect a device
• Works by detecting the low-level subsonic vibrations created by movement
• Choose the right device to plug-in - using light at night and a sound device when you are not home is suggested
• Connect a multi outlet adapter to the Plug & Safe Infrasonic Security Device so lighting and sound can be activated simultaneously
• The device is designed to detect opening of any window or door at the perimeter of an average size property with up to four bedrooms
• The device resets itself after three-minutes

Plug & Safe Infrasonic Security Siren

• Noise level: Very loud (80db)
• Controlled by the Plug & Safe PS8 (needed)
• RX6 unit - emits a piercing tone when activated
• Ear-splitting alarms can help send would be burglars off and running
• Can be activated with delay entry

What's Included

• Plug & Safe Infrasonic Sound Activated Security Device (PS8)
• Plug & Safe Infrasonic Sound Siren
• Quick Start Guide
• Setup Guide

Measurements

• Device: 5-1/2"L x 2-1/2"W x 3"D
• Siren: 2"L x 2-1/2"W x 2-1/4"D

Made in China

Warranty: One-year limited warranty provided by My Cool Gadgets. For warranty support, please call: 1-888-877-0490 or 1-877-892-0932 (siren device).

Please Note: Wooden floors that may flex could cause the device to activate when walking on them. Mobile homes or out buildings could have the same effect. However, the device can still be used when the building, etc is unoccupied. The device can be located almost anywhere indoors, but is probably best located in a central area. Typically, the scanner will detect the opening of, or the breaking of any window at the perimeter of the house as well as the opening of any door at the perimeter of the house. The opening of internal doors will also be detected when opening a door into a room where the unit is installed. However, the opening of doors to small rooms that are remote from the unit may not trigger it. Do not plug electrical devices into the device that may become dangerous if left unattended, such as heaters, electric heaters or television. Do not use with equipment that uses remote control. Maximum 500 watts. Indoor use only. Do not immerse in water.