Skip to main content
Adjust Text Size:

These masks feature an exclusive design that minimizes the pressure points and fits comfortably on most faces. Humidity and moisture resistant filter media that repels moisture for a longer lasting respirator. Strong, rigid outer shell prevents masks from collapsing in high humidity. Dual welded head straps secure the respirator comfortably on the user's face. Latex free woven head straps reduce the possibility of breakage.

Features

  • Exclusive design that minimizes the pressure points and fits comfortably on most faces
  • Humidity and moisture resistant filter media that repels moisture for a longer lasting respirator
  • Strong, rigid outer shell prevents masks from collapsing in high humidity
  • Dual welded head straps secure the respirator comfortably on the user's face
  • Offered in a universal size; the DC300 Series Disposable Respirator is designed to comfortably fit most facial shapes while providing outstanding respiratory protection.
  • Latex free woven head straps reduce the possibility of breakage
  • Provide 95% filter efficiency
  • NIOSH-Approved N95 Particulate Filtering Facepiece Respirator
  • FDA authorized for use under Emergency Use Authorizations
  • For personal use
  • Material: Non-woven polypropylene fiber
  • Length: 5in.
  • Width: 6in.
  • Height: 7in.
  • Weight: 1.5lbs.
  • Country of Origin: Mexico

WARNINGS:

  • This respirator helps protect against certain contaminants. It may not eliminate the risk of contracting disease or infection. Misuse may result in sickness or death.
  • Materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals.
  • Body contacting materials include polypropylene, polyurethane and polyester.
  • Not for use in presence of high intensity heat source or flammable gas.


Disclaimer: This face mask may not be effective in preventing the spread, transmission, and contracting of any particular illness including COVID-19. NIOSH does not endorse any respirators. Approval signifies that the respirator has met the requirements of Title 42, Code of Federal Regulations, Part 84 (42 CFR 84).


Please see the Usage tab for how to use information.


Product Disclaimer

View manual here

Fitting Instructions:


  1. Cup the respirator in the hand, allowing the head straps to hang freely.
  2. Hold the respirator under the chin with the nosepiece facing outwards.
  3. Place the lower head strap around the neck below the ears.
  4. Holding the respirator against the face with one hand, place the top head strap above the ears, around the crown of the head.
  5. Place hands on each side of the respirator and move slightly right, left, up and down, to adjust the position of the respirator and achieve the most optimal fit on the face.
  6. Place both index fingers on the nose clip and apply pressure onto the nose clip, forming it to the shape of your nose to get the best fit possible on your face.

Fit-Check The Face Seal As Follows:


  1. Place both hands over the respirator - do not disturb the position of the respirator.
  2. Exhale sharply (a positive pressure should b e felt inside the respirator).
  3. If you detect air-leaks, readjust the respirator by: applying additional pressure on the nose clip to assure a secure seal on the nose; adjusting the position of the respirator on your face; and/or adjusting the position of the head straps.

Care Instructions:


  1. Do NOT use the respirator or enter or stay in a contaminated area under the following circumstances:
  2. Atmosphere contains less than 19.5% oxygen
  3. Atmosphere contains oil aerosols if using N protection class respirator
  4. For protection against gases or vapors
  5. Contaminants of their concentrations are unknown or immediately dangerous to life or health
  6. Concentrations of contaminants exceed maximum use concentrations in applicable OSHA standards or applicable government regulations or 10 times the PEL (Permissible Exposure Limit), whichever is lower
  7. For sandblasting, paint-spray operations, asbestos
  8. Do NOT modify or misuse the respirator.
  9. Do NOT use the respirator with beards or other facial hair that interferes with direct contact between the face and the edge of the respirator, or any other conditions that may prevent a good face-seal.