Graziella 23K Gold Plated Simulated Diamond & Mother-of-Pearl Panther Ring

Our diamonds have been evaluated and graded by GIA graduate gemologists using the standards established by GIA (The Gemological Institute of America). Through these guidelines, we no longer provide clarity grades for SINGLE cut diamonds.

Diamond Carat
Carat is the standard unit of measurement used to determine a diamond’s weight. Although two diamonds may have the same carat weight, their color and clarity may be different, thus determining each individual stone’s value. Additionally, since larger diamonds are more rare than smaller diamonds, diamond value tends to rise exponentially with carat weight.

More About Diamonds
The most precious of all gems, diamonds have an incredible rarity factor. It takes a minimum of one million diamonds to be mined in order to find a 1.00ct gem-quality diamond, so each 1.00ct quality diamond is literally one in a million. Making them even more incredible, the mining of diamonds requires moving and sifting 250 tons of the Earth’s crust to find just one diamond. Mining companies literally move mountains to find diamonds.

Diamonds have the longest endurance of any substance known on Earth. Carbon dating has established that diamonds, on the average, are 3.4 billion years of age. They consist of pure carbon and there is no chemical difference between them and carbon powder (the lead pencil center). Obviously, however, the physical difference between carbon powder and a diamond is fascinating. Diamonds are created from a basketball-sized piece of pure carbon that becomes white-hot. It is squeezed to the size of a small pearl, turning from black to clear in the process and becoming the hardest material known to humans, ranking a 10.0 on the Mohs Scale . Because they are so hard, diamonds can only be ground and polished by using diamond dust that has been ground from other diamonds.

Diamonds are found in a rainbow of colors. The value of a fancy-colored stone depends largely on the rarity of its color, the saturation of the color, and the purity of the color. Probably the most famous colored diamond is the Hope, which features a deep-blue color and weighs an amazing 45.52ct. It can be seen at the Smithsonian Institute in Washington, D.C.

With diamonds found all over the world, America has a couple small producing diamonds mines, but it only produces industrial grades with non-gem grade material. These black and brown industrial-grade diamonds are widely used as cutting and grinding tools in various industries, such as oil drilling and stone carving.

Diamonds have come to symbolize the ultimate gift of love and romance and, in the United States, are traditionally used in engagement and wedding rings. The tradition of the diamond solitaire engagement ring may have started in 1477, when the Archduke of Austria gave a large solitaire diamond to Mary of Burgundy for her hand in marriage. Amidst this tradition of romance, the diamond is also the birthstone for April and given as 10th, 30th, 60th and 75th anniversary gifts.

Diamonds have been the pride of empires throughout time. Ancient Hindu followers believed diamonds were created by thunderbolts striking the ground. Ancient Greeks believed that diamonds were teardrops of the gods and splinters of stars that had fallen to Earth. The stones were believed to possess magical qualities and have powers far beyond the understanding of common man. Even the name stems from “adamas,” the Greek word for “unconquerable” and “indestructible.”

The diamond is considered the most magical of all gems. When worn, it is believed to promote spirituality, even ecstasy, and is often utilized in meditation. The diamond promotes self-confidence in relations with the opposite sex and is often worn to conquer infertility. The diamond is the stone of love and is worn to ensure fidelity. Owing to its sparkling and flashing nature, it has long been regarded as a stone of protection and peace. It can be worn today for courage and strength, and represents fearlessness and invincibility.

Since only diamonds can scratch other diamonds, it is important to wrap and store your diamond jewelry pieces separately so they do not touch one another. To clean jewelry at home, soak diamonds in warm, sudsy water made with any mild liquid detergent. Brush with a soft toothbrush and rinse and pat dry with a soft, lint-free cloth. Other effective cleaning methods include soaking diamonds in household ammonia, brand-name liquid jewelry cleaners, or even a glass of vodka.

Cubic zirconia is the most readily available, inexpensive and brilliant simulated diamond on the market today. Cubic zirconia does occur naturally in small quantities, but all of the cubic zirconia on the market is produced in a laboratory.

On the Mohs Scale, which measures the hardness of minerals, cubic zirconia is an 8.0 to 8.5. It is important to understand that hardness is not necessarily related to durability. Even though diamond is the hardest mineral (10.0 on the Mohs Scale), it can still be chipped or broken.

The only ways to tell the difference between cubic zirconia and diamond are by use of a thermal probe, by weighing the loose stone or by microscopic examination of surface features and inclusions. Cubic zirconia weighs approximately 65% more than diamond. Therefore, while a 6.25 mm round diamond weighs about 1.00 carat, the same size cubic zirconia weighs about 1.65 carats. If you know the weight of a cubic zirconia, you can figure out the diamond weight equivalent by multiplying the cubic zirconia weight by 0.6, or 60%.

Few natural diamonds on the market today are perfectly cut, and those that are cost much more than the usual diamond. Unleashing the fire, beauty and brilliance of a stone depends on its precise cut. Simulated diamonds are an excellent balance between quality, beauty and price.

Glossary

Brilliance: The white light leaving a jewel, traveling upward, which is visible to the eye. Brilliance is sometimes referred to as “sparkle.”

Dispersion: Flashes of rainbow colors. Also called “fire.”

Hardness: Resistance to scratching. The higher the number, the more resistant.

Luster: The shininess of a jewel.

Toughness: Resistance to breakage.

Mother-of-Pearl
Mother-of-pearl is found on the shells of mollusks, such as mussels and oysters, and the shells of pseudopods, such as snails. When the young of these creatures come into the world, they create a shell "house" in order to preserve their existence. The walls of this housing are formed with layers of their secretions, ensuring a simultaneous growth of house and creature together.

Depending on the type of animal and the environment in which it lives, secretions create various shapes and colors found on the different types of mother-of-pearl. White mother-of-pearl comes from pearl-bearing oysters. It features high reflective properties and is one of the most commonly used types of this material. Iridescent mother-of-pearl is a type in which the colors of pink and green are predominant, while variegated mother-of-pearl is a multicolored type. Stone mother-of-pearl is white with a low reflective power, while mat mother-of-pearl is dull grey and also has a low reflective power.

The shiny quality of mother-of-pearl has attracted attention for thousands of years. The Louvre Museum features mother-of-pearl objects that belonged to the Sumerians and were found in Mesopotamia. In China, a dish with geometric-shaped pieces of mother-of-pearl was found that belonged to the Tang Dynasty in 618-906 A.D. Mother-of-pearl work was also common in ancient Italy, Greece and Cyprus. Today, different types of mother-of-pearl are commonly used in the art world. This type of art is certainly a challenge, for in order for them to be made into works of art, the mother-of-pearl pieces must be thick enough to withstand being worked upon and be of high enough quality to beautifully reflect colors of the rainbow.

Vermeil Plating:
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.

The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.

Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.

To care for your plated jewelry items: