Skip to main content

An all-in-one grooming tool that offers elevated performance for an even trim. It features Stay-Sharp Ceramic, titanium coated blades, two guide combs and four length settings. Treat your trim to this tool!

Tool Set Includes

  • Grooming + Trimming Tool
  • Charger
  • 2 Guide Combs
  • Brush
  • Lubricating Oil

Grooming + Trimming Tool Benefits

  • Stay-Sharp ceramic, titanium-coated blades
  • Two guide combs
  • Four length settings
  • Made in China

Please see the Usage tab for how to use information.

How To Use


  • 1. Insert the appliance plug into the socket of the appliance and put the adapter in the wall socket.
  • 2. Power switch should be set to "OFF" when charging.
  • 3. The charging light will light up, indicating that the appliance is charging.
  • 4. Remove the adapter from the wall socket when the battery is fully charged.

CHARGING REMINDER FUNCTION: When the power capacity is only 5% left, the charging reminder function will light up. When the adapter connects to the appliance to charge, the charging remind icon will remain on.

SELECTING METHOD FOR CUTTING HAIR: Press the setting selector upwards or downwards to set the desired hair length. Slide the hair clipping comb into the guiding grooves on both sides of the handle. The comb should not be loose. Be cautious when taking out the comb. Push the sides of the comb in to release it. Do not push by the teeth of the comb to avoid damaging the unit.


  • Push the middle part of the trimmer upwards with your thumb.
  • Using the small, soft hair brush, gently remove the spring during cleaning
  • Do no disassemble the trimmer or remove the spring during cleaning
  • Set the length to 1.9 mm prior to reassembling the unit.

LUBRICATION REMINDING AND LUBRICATION: When the product has been used for 300 minutes cumulatively, the lubrication icon will light up to remind the user to lubricate the cutting unit. Turn the trimmer off. Remove the clipping comb if desired. Remove any hair or dust from the trimmers. Do not run the hair clipping comb under water. Use approved oil and apply 1-2 drops on the hair clipping comb. Do not use too much oil. Use your fingers to spread the oil across the surface of the comb. Replace the blade. Turn the trimmer power to on to allow the oil to circulate. Use a clean towel to wipe off excess oil.

Disclaimer: Use this appliance only for its intended use as described in the manual. Keep the cord away from heated surfaces. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged or if it has been dropped into water. Never drop or inset any object any of the appliance's openings. Do not use outdoors or operate where aerosol (spray) products are being used nearby or where oxygen is being administered. Always store this appliance and cord in a moisture-free area. Do not store at temperatures exceeding 140F (60C). Make sure the cord is disconnected from the groomer stand when storing. Do not use this appliance with a damaged or broken trimming unit, as injury may occur. Always make sure blades are aligned properly. Do not use an extension cord or voltage converter with this appliance. Do not wrap the cord around the appliance. The power unit is intended to be correctly oriented in a vertical or floor mount position. Keep out of reach of children.