Skip to main content
Adjust Text Size:

Encompass your digit in the dazzle of this vivacious Victoria Wieck for Brilliante® ring! A large radiant cut simulated aquamarine sits resplendently in a halo of smaller simulated diamonds while the polished shank incorporates additional sparkle into the design. Intricate detail work along the side gallery adds an artisan flourish to the piece for look that's both sophisticated and bold.

Ring Details

  • Metal: Platinum embraced™ sterling silver
  • Stone Information:
  • Simulated Aquamarine: One rectangle radiant cut 11 x 9mm
  • Simulated Diamond: A collection of round modified-brilliant cut 1.25mm
  • Setting Type: Prong
  • Approximate Total Weight:
  • Simulated Aquamarine: 5.00 DEW
  • Simulated Diamond: 0.76 DEW
  • Measurements: 1/2"L x 13/16"W x 5/16"H
  • Collection: Victoria Wieck for Brilliante®
  • Country of Origin: Vietnam

Check out the Ring Sizing Guide to find your ring size.

Platinum Plating:
Platinum can be used as a finish coating over sterling silver or copper alloys. Its bright, pure luster enhances the brilliance of gemstones and does not discolor or oxidize. Platinum plating is also characterized by its good resistance to surface abrasion, making jewelry pieces more durable against everyday and long-term wear. Over time, platinum plating will wear off and therefore will require re-plating.

To care for your plated jewelry items:

  • Remove jewelry before bathing, swimming, washing hands, putting on make-up, lotions, perfumes, and/or working with household chemicals, cleaners, or acidic liquids.
  • Do not clean plated jewelry in an ultrasonic cleaner or in silver cleaning solutions, as it could completely remove the plating finish from your item.
  • Ensure your jewelry item is thoroughly dry before storing. Moisture in an enclosed space can increase tarnishing.
  • Store your plated jewelry in a jewelry box lined with felt or anti-tarnish material. Items should not be stacked as this may cause damage to the plating surface.
  • Do not use excessive pressure when cleaning with a polishing cloth or soft brush, as this may cause damage to the plating.
  • Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.

    Cubic zirconia is the most readily available, inexpensive and brilliant simulated diamond on the market today. Cubic zirconia does occur naturally in small quantities, but all of the cubic zirconia on the market is produced in a laboratory.

    On the Mohs Scale, which measures the hardness of minerals, cubic zirconia is an 8.0 to 8.5. It is important to understand that hardness is not necessarily related to durability. Even though diamond is the hardest mineral (10.0 on the Mohs Scale), it can still be chipped or broken.

    The only ways to tell the difference between cubic zirconia and diamond are by use of a thermal probe, by weighing the loose stone or by microscopic examination of surface features and inclusions. Cubic zirconia weighs approximately 65% more than diamond. Therefore, while a 6.25 mm round diamond weighs about 1.00 carat, the same size cubic zirconia weighs about 1.65 carats. If you know the weight of a cubic zirconia, you can figure out the diamond weight equivalent by multiplying the cubic zirconia weight by 0.6, or 60%.

    Few natural diamonds on the market today are perfectly cut, and those that are cost much more than the usual diamond. Unleashing the fire, beauty and brilliance of a stone depends on its precise cut. Simulated diamonds are an excellent balance between quality, beauty and price.

    Glossary

    Brilliance: The white light leaving a jewel, traveling upward, which is visible to the eye. Brilliance is sometimes referred to as “sparkle.”

    Dispersion: Flashes of rainbow colors. Also called “fire.”

    Hardness: Resistance to scratching. The higher the number, the more resistant.

    Luster: The shininess of a jewel.

    Toughness: Resistance to breakage.

    Created or Simulated Gemstones: How are created or simulated gemstones different from natural gemstones? Natural gems are created by the forces of nature and must be discovered, usually by digging in the ground or sifting through a riverbed. When these stones are created in a laboratory, they are called created, simulated or synthetic gemstones.

    The purpose of creating gemstones in a laboratory isn’t necessarily to reduce the cost, but also to produce larger, more perfectly consistent stones. Created or simulated gems can be made of any material. Synthetic gems, however, share virtually all chemical, optical and physical characteristics of their natural mineral counterparts.

    Austrian Crystals: These are known for their excellent reflective quality and prismatic brilliance. This man-made crystal is created using natural minerals and quartz sand, which are then heated and slowly cooled using a process similar to that of creating hand-blown glass. This process creates an end product that can be fashioned into a beautiful crystal.

    A special machine is used to create a highly faceted crystal. The crystals are cut in various directions, which allows for excellent light refraction, exceptional brilliance and unsurpassed color quality at an affordable price.

    Today Swarovski® is one of the largest suppliers of high-end crystals. In the late 1800s, Daniel Swarovski invented a machine to cut crystal with extreme precision. He patented his technique and to this day, only select Swarovski family members and employees have unrestricted access to the production facility that creates these crystals. They are used to decorate everything from stilettos and sculptures, to chandeliers, jewelry and clothing.