Skip to main content
Adjust Text Size:

Bring double the fun to your finger with this Gems en Vogue double halo ring! You'll love the stunning double halo with the inner halo featuring white zircon and the outer halo highlighting Fort Dauphin apatite. A gorgeous cushion shaped larimar calls attention at the center of the ring and a filigree design decorates the top and band. Crafted in polished 18K yellow gold embracedâ„¢ sterling silver and palladium, this ring is sure to add a pop of elegant color to your jewelry box!

Ring Details

  • Metal: 18K yellow gold embracedâ„¢ sterling silver and palladium
  • Stone Information:
  • Larimar: One cushion shaped 12mm cabochon
  • Fort Dauphin Apatite: A collection of round modified-brilliant cut 2mm
  • White Zircon: Various round modified-brilliant cut 1.5mm
  • Setting Type: Bezel/adhesive and prong
  • Approximate Total Weight:
  • Fort Dauphin Apatite: 1.20ct
  • White Zircon: 0.96ct
  • Measurements: 15/16"L x 15/16"W x 1/2"H
  • Country of Origin: India

Check out the Ring Sizing Guide to find your ring size.

All weights pertaining to gemstones, including diamonds, are minimum weights. Additionally, please note that many gemstones are treated to enhance their beauty. View Gemstone Enhancements and Special Care Requirements for important information.

GoldoverSilver    Zircon    Apatite    GemsenVogue    Larimar    PalladiumSilver    

Vermeil Plating:
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.

The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.

Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.

To care for your plated jewelry items:

  • Remove jewelry before bathing, swimming, washing hands, putting on make-up, lotions, perfumes, and/or working with household chemicals, cleaners, or acidic liquids.
  • Do not clean plated jewelry in an ultrasonic cleaner or in silver cleaning solutions, as it could completely remove the plating finish from your item.
  • Ensure your jewelry item is thoroughly dry before storing. Moisture in an enclosed space can increase tarnishing.
  • Store your plated jewelry in a jewelry box lined with felt or anti-tarnish material. Items should not be stacked as this may cause damage to the plating surface.
  • Do not use excessive pressure when cleaning with a polishing cloth or soft brush, as this may cause damage to the plating.
  • Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.

    Zircon:
    Zircon often suffers for its name’s similarity to “cubic zirconia,” the simulated diamond. The stone zircon, however, is actually a beautiful natural gemstone. It is named from the Persian word “zargun,” meaning “gold-colored.” This is despite the fact that it comes in a wide range of rainbow colors . The majority of zircons are brown or yellow-brown, while pure red and green are the most valuable colors. The yellow-red to reddish-brown variety is called “hyacinth.”

    For many years, the most popular type of zircon was the colorless variety. More than any other natural stone, colorless zircons produce a brilliant sparkle similar to diamonds . The most popular color today tends to be the bright pastel blue variety. Sometimes called “starlite,” blue zircon has recently become considered an alternative birthstone for December.

    Zircon is one of the heaviest gemstones, meaning that it will look smaller than other varieties of the same weight. It ranks a hardness between 6.5-7.5 on the Mohs Scale and is mined in Cambodia, Sri Lanka, Thailand, Myanmar and Australia.

    Travelers during the 11th century wore zircon amulets for protection and to encourage welcome greetings on their journeys. In the Middle Ages, the stone was said to bring wisdom and prosperity to its owner. Hindu mythology even mentions the gem when referencing the Kalpa Tree, which was a glowing tree covered with gemstone fruit and leaves of zircon.

    Apatite
    The name apatite comes from a Greek word "apatos," meaning deception, which alludes to the mineral's similarity with other more valuable minerals such as olivine, peridot and beryl. It can be transparent to opaque, with color that is typically green but can also be yellow, blue, reddish brown, violet and colorless. This gem exhibits an unusual "partially dissolved" look similar to the look of previously sucked-on hard candy.

    Apatite is widely distributed in all rock types, but is usually just found as small grains or fragments. Large and well-formed crystals, though, can be found in certain contact metamorphic rocks; but with a hardness of 5.0 on the Mohs Scale, the softness of apatite prevents wide distribution in the jewelry market. Apatite occurs generally in rather rough prismatic crystals, the largest being 4 inches long and 1 inch in diameter.

    In most limestone quarries, careful search shows the presence of small prisms of bright green apatite in the limestone. Notable occurrences include Germany, Brazil, Russia, Myanmar (Burma), Sri Lanka (Ceylon), Canada, East Africa, Sweden, Spain and Mexico.

    Larimar
    One of the newest gemstones to be discovered and acclaimed, the world's only source of larimar is found in one square mountain kilometer on an island in the Caribbean. This wondrous gem's limited locality makes it one of the rarest gemstones in the world.

    The delicacy of mining makes larimar all the more elusive. Generations of island villagers extract the stone by hand, releasing each precious blue gem from an armor of weathered basalt. To look upon larimar is to see the swirling seas of the Caribbean emulated in a palette of ocean blue. Its extraordinary color comes from a mineral composition that creates amazing azure hues. Nature ensures that no two stones are exactly alike.

    Palladium:
    A selection of our jewelry is made of sterling palladium alloy. Palladium is a member of the platinum group of precious metals. By replacing a portion of the copper content used in standard sterling silver with palladium, this proprietary formula renders a precious metal with superior performance attributes. Sterling palladium is five times more tarnish-resistant than standard sterling silver and has strength similar to that of 14K gold.

    Palladium has been used as a precious metal in jewelry since 1939, originally as an alternative to platinum for making white gold. Its naturally white color requires no rhodium plating. Additionally, palladium is proportionally much lighter than platinum and is ideal for use in heavier gemstone jewelry. It is a more expensive alloy than nickel, but it seldom causes the allergic reactions that nickel alloy can.

    To care for your plated jewelry items:

  • Remove jewelry before bathing, swimming, washing hands, putting on make-up, lotions, perfumes, and/or working with household chemicals, cleaners, or acidic liquids.
  • Do not clean plated jewelry in an ultrasonic cleaner or in silver cleaning solutions, as it could completely remove the plating finish from your item.
  • Ensure your jewelry item is thoroughly dry before storing. Moisture in an enclosed space can increase tarnishing.
  • Store your plated jewelry in a jewelry box lined with felt or anti-tarnish material. Items should not be stacked as this may cause damage to the plating surface.
  • Do not use excessive pressure when cleaning with a polishing cloth or soft brush, as this may cause damage to the plating.
  • Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.