Skip to main content

These masks are suitable for protecting the mouth, nose, and chin to airborne particles and block liquid aerosols. The latex free woven head straps reduce the possibility of breakage. They provide 95% filter efficiency.

Features

  • Latex Free woven head straps reduce the possibility of breakage
  • Provides 95% filter efficiency
  • NIOSH-Approved N95 Particulate Filtering Facepiece Respirator
  • FDA authorized for use under Emergency Use Authorization
  • They are made with 4-layers with an aluminum nose clip and elastic bands.
  • Dual welded head straps help secure the respirator comfortably on the user’s face.
  • Humidity and moisture resistant filter media that repels moisture helps the mask last longer.
  • For personal use
  • Suitable for protecting the mouth, nose, and chin to airborne particles and block liquid aerosols.
  • Size: 6" x 5.12"
  • Country of Origin: China

Disclaimer: Disclaimer: This face mask may not be effective in preventing the spread, transmission, and contracting of any particular illness including COVID-19.

Please see the Usage tab for how to use information. NIOSH does not endorse any respirators. Approval signifies that the respirator has met the requirements of Title 42, Code of Federal Regulations, Part 84 (42 CFR 84).

Vendor Warranty Terms: 1(800) 293-2886www.byd.care

How To Use

Please see the manual for the complete Fit Check instructions and additional safety information. View manual here

3-Step check before use:

  • 1. Do not use if packaging has been opened or damaged.
  • 2. Check if elastic bands are in good condition and are not damaged.
  • 3. Check that the metallic strip is not broken.

Use Instructions:

  • 1. Suitable for protecting the mouth, nose, and chin to airborne particles and block liquid aerosols.
  • 2. For adults use only.
  • 3. Do not wash.
  • 4. Store in a cool, dry, clean place away from fire and contamination.
  • 5. Store between -20C and 30C (-4F and 86oF) with relative humidity below 80%.

Wearing instructions:

  • 1. Unfold the mask and hold it with both hands, with the metallic strip facing up.
  • 2. Place elastic bands around the neck and head respectively. Put the mask against your face covering both nose and mouth.
  • 3. Adjust the metallic strip to cover the bridge of the nose using two fingers to press down until achieving a close fit.
  • 4. Perform a fit check according to instructions.

WARNINGS

  • 1. The mask does not eliminate the risk of contracting any disease or infection.
  • 2. Improper use may lead to illness and even death.
  • 3. Use this product immediately after package is opened.
  • 4. Not recommended for more than 8 hours of use.
  • 5. DO NOT sleep while wearing the mask.
  • 6. Avoid hand contact within the interior part of the mask.
  • 7. DO NOT use masks if they expired.
  • 8. For one-time use only. Dispose the mask according to regulations.
  • 9. DO NOT use if package if damaged. Time use limitation. If the mask becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area and replace and refit the new mask.

Material

  • Inner layer: Polypropylene spunbond nonwoven fabric
  • Outer layer: Polypropylene spunbond nonwoven fabric
  • Middle layer: Polypropylene melt-down nonwoven
  • Middle layer: Hot air cotton
  • Elastic bands: Polyester/nylon spandex blend
  • Nose clip Aluminum