Skip to main content
Adjust Text Size:

Charging from the power of the sun, these LED motion sensor lights can be a permanent or temporary light source. Lighting up at dusk and turning off at dawn, you'll never have to worry about on/off switches or the need for wiring.

Once installed and switched "on", your Everbrite will begin to function automatically. Your Everbrite has two modes: Charging Mode and Light Mode. During daylight hours, Everbrite will charge the internal battery through the solar panel. At dusk in the evening (when light is low enough), your Everbrite will automatically switch from charging mode to light mode and the LED lights will turn on at a DIM level (approx. 50%).

In Light Mode, Everbrite will remain on at a DIM level until motion is detected. When motion is detected, the LED lights will turn to high level (100%). The LED lights will automatically return to DIM level approx. 10 seconds after motion stops. At sunrise in the morning (when ambient light is high enough), your Everbrite will automatically switch back into charging mode and begin to charge the battery for the next night.

Solar Powered LED Light Details

  • No need to continuously change batteries
  • Motion activated
  • Auto on/off
  • 4 LED bulbs - super bright
  • Peel & stick backing (can be screw mounted)
  • 600mAh lithium ion battery
  • Made in China

What's Included

  • Solar Lights (2)
  • Screws & Anchors (4)
  • User guide

Measurements

  • 1-1/2"L x 3-1/2"W x 4-1/2"H
  • 0.25 lbs

Please Note: Choose the right location - the best location is facing south and should be in direct sunlight early in the morning and remain in sunlight all day. Everbrite must charge for a minimum of 9 hours each day to see the full effect of the LED lights.