The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.
Cubic zirconia is the most readily available, inexpensive and brilliant simulated diamond on the market today. Cubic zirconia does occur naturally in small quantities, but all of the cubic zirconia on the market is produced in a laboratory.
On the Mohs Scale, which measures the hardness of minerals, cubic zirconia is an 8.0 to 8.5. It is important to understand that hardness is not necessarily related to durability. Even though diamond is the hardest mineral (10.0 on the Mohs Scale), it can still be chipped or broken.
The only ways to tell the difference between cubic zirconia and diamond are by use of a thermal probe, by weighing the loose stone or by microscopic examination of surface features and inclusions. Cubic zirconia weighs approximately 65% more than diamond. Therefore, while a 6.25 mm round diamond weighs about 1.00 carat, the same size cubic zirconia weighs about 1.65 carats. If you know the weight of a cubic zirconia, you can figure out the diamond weight equivalent by multiplying the cubic zirconia weight by 0.6, or 60%.
Few natural diamonds on the market today are perfectly cut, and those that are cost much more than the usual diamond. Unleashing the fire, beauty and brilliance of a stone depends on its precise cut. Simulated diamonds are an excellent balance between quality, beauty and price.
Brilliance: The white light leaving a jewel, traveling upward, which is visible to the eye. Brilliance is sometimes referred to as “sparkle.”
Dispersion: Flashes of rainbow colors. Also called “fire.”
Hardness: Resistance to scratching. The higher the number, the more resistant.
Luster: The shininess of a jewel.
Toughness: Resistance to breakage.
Named from the French word for lemon, “citron,” citrine is a variety of quartz available in a range of golden hues from lemon, to straw, to sun yellow, to deep gold, to orange, brown and deep red. Darker colors are more highly valued, including the medium golden-orange and dark-sherry colors, sometimes called Madeira citrines after the color of the wine.
Citrine crystals can form together with amethyst to form ametrine, or with smoky quartz to form bicolored quartz. Citrine is generally less expensive than amethyst, and is also available in a wide range of calibrated sizes and shapes, including very large sizes. Considered an alternative to topaz as the birthstone for November, it is also thought to be the traditional gift for couples celebrating their 13th and 17th wedding anniversaries. Citrine ranks a 7.0 on the Mohs Scale, and because of this durability, it is ideal for jewelry wear.
Almost all citrine on the market is heat-treated amethyst, and generally starts life as either smoky quartz or amethyst geodes. Heat treatments first turn them clear and then give them a permanent color ranging from yellow to brownish-red. In some amethyst deposits, the amethyst has been partially or fully changed to brown citrine by natural means of heating, thereby transforming it into citrine. Natural citrine is pale yellow to orange, and occurs in much lighter hues than the heat-treated material. Citrines whose colors have been produced by artificial means tend to have much more of an orange or reddish caste than those found in nature. Since most citrine was originally amethyst that was heated to turn its color to gold, both citrine and amethyst jewelry should be kept away from prolonged exposure to strong light or heat.
Most citrine is mined in Brazil, but almost all of the Brazilian material is heat-treated amethyst. Supplies are most plentiful in the Brazilian state of Rio Grande do Sul, particularly from the Serra Mine. The Ira' Mine also produces large quantities of the gem. Citrine can also be found in the Ural Mountains of Russia, in Dauphine, France, and in Madagascar.
In ancient times, citrine was carried as a protection against snake venom and evil thoughts. It was thought to give calmness and mental balance to its wearer. Throughout history, people have confused citrine for topaz. Many citrines were sold as topaz and thus thought to carry the same qualities, such as knowledge and beauty. Today, citrine symbolizes truth and integrity, and is believed to promote creativity and personal clarity.
Earring Back Types
The backing is an important part of an earring, providing a secure closure and comfortable fit. Keep in mind, some earring styles work better with certain back types. Experiment with the different types to find the best fit for you!
Butterfly Back: A double looped piece resembling a butterfly that fits over a post. Variations on this design are called push back clasps. The basic post and butterfly back are usually used for stud earrings and lighter weight drop earrings.
Hinged Snap Backs: This clasp features a hinged post that snaps into a groove on the back of the earring. It is commonly found on hoops. Sometimes the hinged post is curved to provide more room to fit around the ear, sometimes called a saddleback.
Hook Backs: This earring backing is simply a long, bent post that fits through the piercing. Hooks have several variations, most notably the shepherd's hook and the French hook. While thin wire hooks reduce the weight of long earrings, making them more comfortable, they aren't as secure as other clasp styles.
Lever Back: A hinged lever snaps shut against the curved post to form a closed loop around the ear lobe. This clasp is very secure and good for large or medium sized styles that drop just below the ear.
Omega: Also called French clips, this clasp has a straight post and a looped lever. The hinged lever closes around the post and is held against the ear with pressure. The omega clasp is the most secure clasp, especially for the larger, heavier earrings.
Screw back: This backing is a slight variation of the standard post and butterfly nut back. Instead of pushing on the back, the nut twists onto the threaded post. A screw back post design is often preferred for expensive diamond stud earrings that require increased security.