Simulated Diamond Gold over Bronze
Cubic zirconia is the most readily available, inexpensive and brilliant simulated diamond on the market today. Cubic zirconia does occur naturally in small quantities, but all of the cubic zirconia on the market is produced in a laboratory.
On the Mohs Scale, which measures the hardness of minerals, cubic zirconia is an 8.0 to 8.5. It is important to understand that hardness is not necessarily related to durability. Even though diamond is the hardest mineral (10.0 on the Mohs Scale), it can still be chipped or broken.
The only ways to tell the difference between cubic zirconia and diamond are by use of a thermal probe, by weighing the loose stone or by microscopic examination of surface features and inclusions. Cubic zirconia weighs approximately 65% more than diamond. Therefore, while a 6.25 mm round diamond weighs about 1.00 carat, the same size cubic zirconia weighs about 1.65 carats. If you know the weight of a cubic zirconia, you can figure out the diamond weight equivalent by multiplying the cubic zirconia weight by 0.6, or 60%.
Few natural diamonds on the market today are perfectly cut, and those that are cost much more than the usual diamond. Unleashing the fire, beauty and brilliance of a stone depends on its precise cut. Simulated diamonds are an excellent balance between quality, beauty and price.
Brilliance: The white light leaving a jewel, traveling upward, which is visible to the eye. Brilliance is sometimes referred to as “sparkle.”
Dispersion: Flashes of rainbow colors. Also called “fire.”
Hardness: Resistance to scratching. The higher the number, the more resistant.
Luster: The shininess of a jewel.
Toughness: Resistance to breakage.
Pronounced "vermay," vermeil is an electroplating process in which 14K gold or higher is coated over sterling silver. Officially designated by the jewelry industry, items may only be sold as vermeil if they have a minimum thickness of 100 millionths of an inch (2.5 microns) of gold over the silver. Regular gold plating is less than 2.5 microns.
The "vermeil" technique of plating sterling silver with gold originated in France in the 1750s. It differs from "gold filled" or "gold plated" in terms of the thickness or thinness of the microns over sterling silver. "Gold filled" pieces have a much thicker layer, between 15 and 45 microns, which is mechanically bonded to the base metal with heat and pressure. Vermeil is a more expensive version of "gold plated". It does not wear off as quickly as gold plating does. However, over time, vermeil wears off and therefore will require re-plating.
Gold/Platinum Embraced Silver or Bronze:
Our platinum and gold embraced collections feature layers of platinum or 18K gold over sterling silver or bronze for a lustrous, radiant finish everywhere you look and touch.
To care for your plated jewelry items:
Remove jewelry before bathing, swimming, washing hands, putting on make-up, lotions, perfumes, and/or working with household chemicals, cleaners, or acidic liquids.
Do not clean plated jewelry in an ultrasonic cleaner or in silver cleaning solutions, as it could completely remove the plating finish from your item.
Ensure your jewelry item is thoroughly dry before storing. Moisture in an enclosed space can increase tarnishing.
Store your plated jewelry in a jewelry box lined with felt or anti-tarnish material. Items should not be stacked as this may cause damage to the plating surface.
Do not use excessive pressure when cleaning with a polishing cloth or soft brush, as this may cause damage to the plating.
Over time your plated items will need to be re-plated. Contact your local jeweler for information on plating services.